Chassis Parts Rear Outer Hub Oil Seal 8982029120 8-98202912-0 Isuzu 4HK1
| Part No. | WW80043 |
| OEM No. | 8942481171 |
| Part Name | Oil seal; front hub 73*90*8/8,4 |
| Model | 4HG1/4HG1-T/4HE1/4HK1 |
WW80043 8942481171 Oil seal; front hub 73*90*8/8,4 4HG1/4HG1-T/4HE1/4HK1
More oil seal :
| Part No. | OEM No. | Part Name | Model |
| WW80040 | 8941180919 | Steering wheel box oil seal 22*35*7 | 4HG1/4HG1-T/4HE1/4HK1 |
| WW80041 | 8971229370 | Oil seal; rear hub inner 82*121/100*12/2 | 4HG1/4HG1-T/4HE1/4HK1 |
| WW80042 | 8943363172 8982029120 | Oil seal; rear hub out 49,17*100*8/9,8 | 4HG1/4HG1-T/4HE1/4HK1 |
| 8943363161 | 8943363161 | Rear Hub oil seal | 4HE1/4HK1 |
| WW80043 | 8942481171 | Oil seal; front hub 73*90*8/8,4 | 4HG1/4HG1-T/4HE1/4HK1 |
WW80036 8971486900 (8971821110) Hydraulic power steering repair kit 4HG1
WW80037 8970985312 Steering wheel 4HG1/4HG1-T/4HE1/4HK1
WW80038-600P 8973786340 Steering wheel shaft long 4HG1/4HG1-T/4HE1/4HK1
WW80039- NKR 8973786320 Steering wheel shaft short 600P/4KH1/100P E2
WW80039 Steering wheel shaft short NKR94
WW80040 8941180919 Steering wheel box oil seal 22*35*7 4HG1/4HG1-T/4HE1/4HK1
The specific process flow of rubber skeleton oil seal production
1. Rubber material preparation section,
Raw materials - factory inspection - batching - mixing - filtration - adding vulcanizing agent - rubber inspection - pre-molding According to the above process, raw materials can be mixed after passing the inspection of the factory.
2. Mold preparation section,
The processing and processing process of oil seal mold and other rubber seal molds is the same. Usually, the blank is forged to eliminate its internal stress, and then tempered, heat treatment, and sometimes the cavity surface treatment is carried out on the mold as needed. Such as surface nitriding or hard chrome plating.
Product Tags:
|
|
ISUZU Chassis Parts Front Wheel Hub Oil Seal 8942481171 73*90*8/8,4 Images
|
